Simple spray and rinse away!

303 SiO2 Touchless Sealant is an easy-to-use protection product that will allow you to receive the same protection you would expect from a wax in a fraction of the time! The most attractive feature of 303 Touchless Sealant is its fast and simple spray-on-rinse-off application process. The fact that you don’t have to touch your car’s paint with anything in order to apply 303 Touchless Sealant greatly cuts down on the risk of ruining your paint’s impeccable finish. 303 Touchless Sealant will give you durable protection that not only rivals, but also exceeds what you can expect from a traditional wax!

Taking proper care of your car is a very time-consuming and difficult effort. There are so many different aspects of car detailing that it can be incredibly tough to allot the time necessary to do them all. One of the most important and lengthy processes in car detailing is the application of a protective wax or sealant. This process can take an entire day to do properly and needs to be done frequently enough to make your dread doing it as often as you must. So, instead of giving up in frustration, let 303 Touchless Sealant make your life a whole lot easier!

303 Touchless Sealant was formulated using a special blend of SiO2 that allows it to bond much quicker and easier than most SiO2 products you see on the market. 303 Touchless Sealant is water-activated and does not require any buffing in, buffing off, or curing to work properly. This unique functionality of 303 Touchless Sealant allows it to be applied in a fraction of the time it would take to apply a traditional wax or sealant. All you need to do is spray 303 Touchless Sealant on your wet car after you wash it and then rinse it away with water!


Works great on glass & windshields too!

303 Touchless Sealant - 946 ml

  • Wash your car out of direct sunlight while surface is cool. While surface is still wet and out of direct sunlight, spray a small amount of product evenly across surface, treating one section of vehicle at a time. Only a light mist of product is needed. Immediately rinse section off. You will see water beading on surface, meaning it is now protected. Repeat steps on all sections of vehicle, and then dry thoroughly with a waffle weave drying towel or microfiber towel. Make sure to rinse product off each section of vehicle thoroughly immediately after applying product – do not let dry on surface, as water spots may occur. Water spots and streaks can also occur if too much product is used, and not rinsed off thoroughly. If water spots occur, rinse surface thoroughly again and dry.