Developed for the final stage of the polishing process, this ultra-fine finishing polish is designed to achieve a flawless finish and deep gloss, ideal for those seeking true show car shine.
Its advanced water-based formula removes haze, holograms and residual marring, evening out the surface and enhancing every detail of the paintwork. The result is a crystal-clear finish capable of emphasizing color depth and reflectivity, especially on dark and metallic paints.
Thanks to its low oil content and minimal residue, the product wipes off extremely easily, leaving the surface clean and ready for the application of sealants, waxes or coatings. Completely free from fillers, it delivers a true and transparent result, perfect for accurate inspection and for those who want a perfectly prepared base for the final protection stage.
Cut: 3/10
Finish: 10/10
Color: white
Odor: light and pleasant
Physical state: creamy
PaiCar Jeweling Polish
1. Surface preparation
The surface must already be corrected and refined, free from any visible defects.
Remove any residue from the previous polish with a clean, soft microfiber towel and
IPA solution.
Verify that the panel is cool, dry and in a controlled environment.
2. Pad choice
Use an ultra-soft or finishing foam pad, ideal for achieving maximum gloss.
Dual action polisher with a maximum 8 mm orbit for a gentle and uniform polishing process.
3. Product application
Shake the bottle well.
Apply 2–3 drops of product onto the pad.
Spread the polish over the panel with the machine turned off, lightly dabbing it to avoid splatter.
4. Work process
Start at low speed to spread the product.
Slightly increase the speed to activate the polishing action, maintaining minimal pressure.
Work in small areas (approximately 40×40 cm) using cross-hatch passes.
The goal is to even out the surface, eliminating haze, holograms and residual marring.
5. Result inspection
After 2–4 passes, stop the polishing cycle.
Remove the residue with a clean, dry microfiber towel.
Inspect the panel with an inspection light to verify optimal gloss and cleanliness.
6. Final protection
Once the desired finish is achieved, clean the surface with an IPA solution and apply the selected sealant, wax or coating.
This polish is ideal as the final step, as it leaves the surface perfectly ready for protection.
Pro tips
The low-oil, low-residue formula ensures quick, clean removal with no streaks or hazing.
Perfect for achieving true show car shine, especially on dark colors and high-reflective surfaces.
Always work in well-lit, contaminant-free environments to maximize the result.
