The Tornador Black Interior Cleaning Tool is a pneumatically operated suction spray gun which very finely atomises soap, water and air and dispenses it under high pressure. It removes dirt and grime quickly and uses lower consumption of the cleaning product. The newly developed rotation set in the nozzle of the new Tornador BLACK is more powerful and and cleans faster than the original Tornador Interior Cleaning Tool. Wear of working components has been minimized because of the rotation set no longer comes into contact with the nozzle.`
For professional car detailing companies the new Tornador BLACK is a must-have! You will save time, energy and cleaning chemicals, because the new Tornador BLACK works more powerful and more efficient on less air-pressure than the original Tornador. The compressed-air driven suction feed gun rotates spirally during operation and loosens dust particles with extremely high power from the surface. Makes cleaning an interior a cinch!
Tornador Black is also able to work with small or mobile compressors, because the full potential power is available at pressures as low as 4.5 cfm - 75 to 90 PSI. The new Tornador Black comes standard with an air-regulator so you are now able to change the working pressure directly on the tool and also to regulate the capacity of chemicals accurately.
The Tornador Black Car Cleaning Gun releases a fine mist of cleaning solution that does not over saturate surfaces. You’ll see the liquid turning dirty as grime is released from the surface. Wipe with a microfiber towel. Then turn the dial to shut off the water and use the compressed air to dry the cleaned area. It’s that simple.
Use the Tornador Black Z-020 on the dashboard, door panels, steering wheel, fabric upholstery, carpet, floor mats, and between seats. It cleans in tough-to-reach places between seats and in seams. Because it releases so little liquid, surfaces dry quickly.
Click HERE for product video
Click HERE for product brochure (PDF format)
Designed to work with the supercharged Tornador Z-020 Black and a wet/dry vacuum, the Tornador Velocity-Vac totally expands the capabilities of your Tornador Black. With a few easy installation steps, your Tornador Black is now ready to tackle even the filthiest interiors. The all-in-one cleaning tool is just what you’ve been waiting for!
Rather than having a separate tool for pressure blowing, interior cleaning, and heavy duty vacuuming, simply attach the ZV-200 Tornador Velocity-Vac to your Tornador Black and go!
Suck up sand, dirt, crumbs, pet hair, etc. with the vacuum attachment, while the existing inner tube sprays a light coating of cleaning solution. Once the section is clean, flip over to the compressed air setting and dry! The ZV-200 Tornador Velocity-Vac features a couple different settings, allowing you to decide which works best for you and your project.
Choose the liquid and vacuum setting for stubborn, ground-in stains. The cleaner will loosen the debris’ hold on your carpet or upholstery, and the vacuum will remove it once loosened. Use the air and vacuum setting to blow up and dislodge dirt, dust, and pet hair before the vacuum sucks it away. ZV-200 Tornador Velocity-Vac can be used on all interior carpets and upholstery.
Click HERE for product video
Tornador Z-020 Black Car Cleaning Tool with ZV-200 Velocity Vac Combo Set
To clean any surface, dilute the desired cleaner according to label’s directions. Turn the liquid valve straight up and use an overlapping motion as you pass the Tornador Car Cleaning Gun over the surface. If necessary, allow the cleaning liquid to dwell for 10-15 seconds. Use a microfiber towel to absorb excess liquid. Then turn the liquid valve off and use the compressed air to dry the cleaned area.